Granada Boulevard to A1A: Two Different Roofs, One Contractor
Ormond Beach’s commercial buildings fall into two very different categories, and they don’t face the same conditions. A storefront on the historic Granada Boulevard corridor deals with Florida heat and humidity. A hotel or restaurant out on A1A, facing the Atlantic directly, deals with that plus constant salt spray and wind load most inland buildings never see. Thomas Roofing and Repair has handled both since 2018 from our Holly Hill office, holding SOPREMA certified installer status and Florida Contractor License #CCC1333138, and we spec the roof differently depending on which side of the Halifax River your building sits on.
Three core services:
Repair
Replacement
Coatings
Repairing Roofs That Face the Atlantic Directly
A commercial roof on A1A in Ormond Beach takes a beating that a building a mile inland on Granada Boulevard simply doesn’t, direct salt spray, higher wind-driven rain, and UV exposure amplified by the reflection off open water. We repair both, but we don’t treat them the same way.
EPDM Roof Repair
On oceanfront buildings, EPDM seams give out from direct salt exposure well before the membrane itself would normally fail, and the failure point is almost always at a seam rather than an open field puncture. We inspect every seam on an A1A roof, not just the one that’s actively leaking, since salt spray degrades adhesive evenly across the whole system rather than in one isolated spot.
Metal Roof Repair
A metal roof a block off the beach corrodes at a different rate than one in the historic district further inland, and that difference shows up fastest at exposed fastener heads facing the ocean side of the building. We replace with marine-grade hardware on oceanfront repairs specifically, which standard fasteners can’t match for how long they’ll actually hold here.
Tile Roof Repair
Tile on a Granada Boulevard storefront in the historic district generally just deals with age and storm wear, while tile on an oceanfront property also fights salt-driven underlayment breakdown. We check underlayment condition more aggressively on the oceanfront side of town, since a crack that looks cosmetic on the surface often means a bigger problem underneath on a beachfront building.
TPO Roof Repair
TPO seams on A1A properties face UV reflected off the water on top of standard exposure, which accelerates wear beyond what the same membrane would see on Granada Boulevard. We re-weld with equipment calibrated for that combined load and pressure-test before closing out any oceanfront repair.
Replacing a Commercial Roof in Ormond Beach
When a roof reaches the point where repair isn’t the financially smart move anymore, we handle full replacement with the building’s actual exposure in mind, not a one-size answer for the whole city.
EPDM Roof Replacement
An EPDM system on an oceanfront property usually reaches replacement sooner than the same system set back from the water, since salt exposure works against seam adhesive continuously rather than seasonally. We tear off to the deck, check for moisture trapped by years of coastal humidity, and install a membrane system matched to the building’s actual distance from the Atlantic.
Metal Roof Replacement
Corrosion that’s worked through enough panels on a beachfront building usually means replacement, and the panel finish matters more here than almost anywhere else in Volusia County. We walk through coastal-rated finish options specifically for A1A properties, since a standard inland finish underperforms fast this close to open water.
Tile Roof Replacement
Tile roofs in the historic Granada Boulevard district typically reach replacement from age and storm cumulative wear, while oceanfront tile roofs more often fail from underlayment breakdown first. We diagnose which one’s driving the decision before quoting the job, since that changes what the replacement actually needs underneath the tile.
TPO Roof Replacement
A TPO system with seams failing across an oceanfront roof, from the combined UV and salt exposure, usually isn’t worth chasing with more patches. We install a new system with factory-welded seams built for that specific load, not a standard Central Florida spec.
New Commercial Roof Installation for Ormond Beach
Whether it’s new construction in the historic district or a hospitality build on A1A, we spec the system for where the building actually sits, since “Ormond Beach weather” means something very different depending on which side of the Intracoastal you’re on.
EPDM Roof Installation
On a new oceanfront build, EPDM seam work gets extra attention upfront since retrofitting salt-air protection later costs more than specifying it correctly the first time. We size drainage for storm intensity near open water, which runs heavier than what the same building would see set back on Granada Boulevard.
Metal Roof Installation
A new hotel or restaurant build on A1A needs marine-grade fasteners and coastal finish from day one, not a standard metal spec with corrosion problems waiting two years out. We choose panel and finish based on actual proximity to the water, not a blanket citywide standard.
Tile Roof Installation
Tile installed in the historic district handles differently than tile going on a new oceanfront property, where underlayment choice matters more than the tile itself for long-term performance. We spec that layer for the building’s actual exposure rather than treating every Ormond Beach tile job the same.
TPO Roof Installation
New commercial construction near the water needs TPO seam welding that accounts for UV reflected off the ocean on top of standard Florida sun exposure. We install accordingly rather than applying an inland spec to a beachfront building.
We install TPO systems with precision to ensure proper insulation, drainage, and seam welding. This results in a clean, watertight finish that’s prepared for virtually anything.
Why Two Buildings a Mile Apart Need Different Roofs
Ormond Beach is a city of roughly 43,000 people, considerably larger than most of its Volusia County neighbors, and its commercial base splits cleanly in two. The historic Granada Boulevard corridor, running from A1A to Orchard Street, carries the city’s shops and restaurants in what’s been a commercial district since the early 1900s, when Ormond Beach earned its “Birthplace of Speed” reputation from early auto racing on its hard-packed sand. The oceanfront stretch along A1A is a different animal entirely, hotels and restaurants built to serve tourism, sitting directly exposed to the Atlantic with none of the buffer the historic district has. We factor in which of those two environments a building sits in before recommending repair, replacement, or a coating, because deck condition and corrosion progression genuinely look different depending on which side of town you’re on.
When a Coating Makes More Sense Than Tearing Off
Plenty of buildings in Ormond Beach’s historic district have a sound deck under a membrane that’s simply worn out from age and Florida sun, exactly the situation a certified silicone coating is built to solve. Done right, it restores full waterproofing and adds a decade or more of service life for less than a full replacement would cost. On oceanfront properties, a coating candidate has to be evaluated more carefully given the added salt exposure, but when the deck qualifies, the economics work the same way. Thomas Roofing and Repair’s SOPREMA certified installer status means that work carries manufacturer-backed warranty documentation an uncertified contractor has no way to offer.
We Can Finance Your Project
- Insurance Claims Assistance
- Paid at Closing Options Available
What Ormond Beach Property Owners Get From Thomas Roofing
Managing a commercial roof in Ormond Beach means managing one of two very different risk profiles, inland heat and humidity or direct oceanfront exposure, and most contractors don’t actually distinguish between them. We do, because the difference changes what actually goes on the roof.
Trusted Local Experts
Licensed under Florida License #CCC1333138 and insured, operating out of our Volusia County office in Holly Hill, with crews who spec materials differently for a Granada Boulevard storefront than for an A1A hotel, rather than running one standard job for the whole city.
Durable Roofing Systems
Every system we install meets Florida Building Code as a minimum, with coastal-rated materials specified further for anything within direct reach of Atlantic salt spray.
Energy Efficient Solutions
A reflective roof surface cuts cooling costs on any Ormond Beach building, but it matters most on the hospitality properties along A1A running air conditioning for guests year-round.
Custom Solutions for Every Property
A historic district storefront and an oceanfront hotel aren’t the same roofing job, and we don’t quote them like they are.
Reputation That Stands Behind Every Project
We’ve worked both sides of this city since 2018, and the same crew that handles a Granada Boulevard repair handles an A1A replacement, same standards either way.
Low-Maintenance, Code-Compliant Systems
Every job site runs on OSHA and NCRA safety standards, and every installation meets Florida Building Code, oceanfront or inland.
What our clients say
Customer Reviews
Why Oceanfront Roofs Need Silicone, Not Acrylic
A1A properties in Ormond Beach sit on the barrier island itself, directly exposed to the Atlantic rather than buffered by the mainland the way Granada Boulevard is. That means constant salt spray on top of Florida’s usual heat, humidity, and storm pattern, and acrylic coatings fail under that combination faster than almost anywhere else in Volusia County. Standing water after a summer storm is where the real damage starts, since acrylic loses its grip on a membrane once ponding becomes routine. Silicone holds its seal under standing water, resists the combined UV and salt exposure without chalking, and reflects enough heat to cut cooling costs meaningfully on a beachfront hotel or restaurant.
Silicone Coating Performance Against Direct Ocean Exposure
- Keeps its waterproofing seal under standing water, where acrylic fails
- Resists the combined UV and salt spray unique to barrier island buildings
- Stays flexible through heat cycling instead of cracking at seams
- Seamless application removes the failure points salt spray attacks first
- Performs under sustained oceanfront exposure, not just occasional coastal humidity
- Low upkeep for the life of the warranty
The Cost Case for Coating Over Full Replacement
A full tear-off on an A1A hospitality property means disposal, a deck inspection, new insulation, and a complete new system, real cost and real disruption for a hotel or restaurant that depends on being open for guests. A certified coating skips the tear-off. Surface prep, seam reinforcement, and the coating itself go down while the property stays operating, ending in a waterproofed, warrantied roof for a fraction of replacement cost.
SOPREMA Certification on a Coastal Job Like This
SOPREMA’s systems are built for exactly the conditions Ormond Beach’s oceanfront creates, high UV, humidity, and direct salt exposure all at once. Certification means specific training in surface prep, application thickness, and verification for SOPREMA’s systems, and it’s the direct requirement for their extended warranty. An uncertified contractor can buy the same product, but they can’t issue that paperwork. We run every coating job here to SOPREMA’s spec, whether it’s a Granada Boulevard storefront or an A1A hotel, from the first inspection through final sign-off.
What SOPREMA Certified Installer Status Delivers for Your Property
- Factory authorization to apply SOPREMA systems to spec
- Installation that meets the exact requirement for warranty issuance
- Access to an extended manufacturer warranty uncertified contractors can’t offer
- A full documentation package at project closeout
- Accountability to SOPREMA’s standards on every job, oceanfront or inland
Our Services
The Buildings We Work On in Ormond Beach
Ormond Beach’s commercial base splits between its historic district and its hospitality corridor, and we’ve worked both since 2018. Granada Boulevard carries locally owned shops and restaurants that have operated in that district for decades. A1A carries the hotels and restaurants serving the tourism the city’s beach has drawn since its auto-racing days, with substantial hotel capacity within a few miles of the water.
A storefront roof in the historic district and a hotel roof on A1A don’t get the same treatment, because they’re not under the same stress. The job stays the same regardless: protect guests, inventory, and operations from whatever this stretch of coast and inland Volusia weather throws at the building next.
Retail Stores
Office Buildings
Industrial Properties
Warehouse Facilities
Hospitals
Schools
What a Coating Warranty Actually Covers Here
A coating warranty depends entirely on whether the installation followed SOPREMA’s spec exactly, and that holds whether the roof is three blocks from the ocean or thirty. Skip a step and the extended warranty simply isn’t available, regardless of how the finished coating looks. Certified installer status is what gets an Ormond Beach project into that program at all.
Coverage varies by tier but typically includes material performance and, on some tiers, protection against water infiltration through the coating for the full term. That documentation holds up past the job too, becoming part of the building’s record for a future lease or sale.
Warranty Layers Available on Thomas Roofing Coating Projects
- Extended SOPREMA warranty, unlocked only by certified installation
- Terms tied to spec-compliant work, not a blanket guarantee
- Full closeout documentation: materials, application dates, warranty terms
- Transferable coverage that holds weight in a lease negotiation or sale
How We Check If Your Ormond Beach Roof Qualifies for a Coating
Deck condition decides this more than location does, though location affects how we evaluate it. Our free inspection checks membrane type and wear, whether moisture or salt has already worked into the insulation, and whether the deck is still structurally sound. A solid deck with contained membrane wear is a strong coating candidate, oceanfront or inland. A compromised deck or widespread damage means replacement, and we’ll say so rather than sell a coating on a roof that won’t hold it.
Get a Commercial Roof Evaluation in Ormond Beach
Whether your building sits on Granada Boulevard or faces the Atlantic directly on A1A, Thomas Roofing and Repair handles the roof differently because the exposure is different, not because the city name changes. Call or request a free estimate online and we’ll get a crew out to look at your roof.
Frequently Asked Questions
What commercial roofing services does Thomas Roofing & Repair offer in Palm Bay, FL?
Thomas Roofing & Repair provides full commercial roofing services in Palm Bay, including inspections, targeted repairs, complete replacements, professional installations, and roof coatings tailored to business properties of all types and sizes.
Which commercial roofing systems can be serviced or installed in Palm Bay?
The team works with various commercial roofing systems — such as metal roofing, TPO, EPDM, and tile roofing — offering everything from repairs and maintenance to full replacements and new roof installations.
Why are regular commercial roof inspections important for Palm Bay businesses?
Regular inspections help identify early signs of damage like membrane separation, flashing issues, drainage problems, or structural stress, preventing small issues from becoming costly repairs and helping extend the life of your roof.
What are commercial roof coatings and how can they benefit businesses in Palm Bay?
Commercial roof coatings create a seamless, watertight protective layer that helps resist moisture infiltration, shields against UV damage, and extends roof lifespan — providing a cost-effective alternative to full replacement when conditions allow.
Can Thomas Roofing & Repair handle commercial roof replacements and new installations in Palm Bay?
Yes — whether it’s aging roofing systems or new construction, Thomas Roofing & Repair offers commercial roof replacements and installations, helping building owners select the right materials and delivering efficient, high-quality work with minimal disruption.
Where we are
Service Areas
- Alafaya
- Altamonte Springs
- Apopka
- Avalon Park
- Azalea Park
- Belle Isle
- Buena Ventura Lakes
- Casselberry
- Celebration
- Clermont
- Conway
- Davenport
- Doctor Phillips
- Edgewood
- Eustis
- Four Corners
- Gotha
- Haines City
- Highland City
- Horizon West
- Kissimmee
- Lake County
- Lake Mary
- Lake Nona
- Lakeland
- Lakeland Highlands
- Leesburg
- Longwood
- Maitland
- Marion
- Meadow Woods
- Montverde
- Mount Dora
- Oak Hill
- Oakland
- Ocoee
- Orange County
- Orlando
- Osceola County
- Oviedo
- Pine Hills
- Poinciana
- Sanford
- Seminole County
- St. Cloud
- Sumter County
- Tavares
- Union Park
- University
- Waterford Lakes
- West Brevard County
- Windermere
- Winter Garden
- Winter Park
- Winter Springs